technical data sheet - draft 7/16 straight jack (1/2?r) 60K117-C03N1 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to iec 60169-4, vg 95250, en 122190, din 47223 documents assembly instruction 60 i37 material and plating connector parts material plating center contact spring bronze silver, 3-6 m outer contact brass flash white bron ze over silver(e.g. optargen?) body brass flash white bronze over silver(e.g. optargen?) dielectric ptfe gasket silicone
technical data sheet - draft 7/16 straight jack (1/2?r) 60K117-C03N1 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 electrical data impedance 50 frequency dc to 8.3 ghz return loss 35 db, dc to 1 ghz 30 db, 1 to 2.7 ghz insertion loss 0.05 db insulation resistance 10 4 m center contact resistance 0.4 m outer contact resistance 1.5 m test voltage (at sea level) 4000 v rms, 50 hz working voltage (at sea level) 2700 v rms, 50 hz power handling (at 20 c, sea level, vswr 1.0) 1800 w @ 1 ghz 800 w @ 4 ghz rf-leakage 128 db up to 1 ghz intermodulation (3 rd order) -117 dbm @ 2 x 20 w - limitations are possible due to the used cable type ? mechanical data mating cycles min. 500 center contact captivation: axial 200 n radial 2 ncm coupling torque (recommended) 25 to 30 nm proof torque max. 35 nm environmental data temperature range -45c to +85c rapid change of temperature din en 122190, clause 4.6.7 corrosion salt mist din en 122190, clause 4.6.10 vibration din en 122190, clause 4.6.3 damp heat din en 122190, clause 4.6.6 climatic tests din en 122190, clause 4.6.5 (45/85/56) degree of protection (unmated condition) iec 60529, ip68 2.5 bar 2002/95/ec (rohs) compliant tooling n/a suitable cables sl 012 r pe or frnc (recommended) leoni 1/2 ?r; andrew ldf 4-50a rfs lcf 12-50 packing standard 1 pce in bag weight 86 g/pce draft date approved date rev. engineering change number name date a. k?nig 09/07/08 a. k?nig 11/09/08 100 08-v228 a_wallner 28/07/08 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|
